These principles when choosing where to place the fridge

Principles of thermal collection of fridge is cold environment (freezer and fridge compartment) through the evaporator and heat in ambient air through condensation orchestra. So, although the placement of the substrate to cool refrigerator, air circulation, avoid sunlight, radiators or heating devices. Statistics should not be too close to the kitchen refrigerator, affect the durability of the cabinet.

Also, it should be noted not for Statistics refrigerator condenser wall radiate heat. Statistics refrigerators must be at least 10cm from the wall for easy air flow through the condenser. If that kind of refrigerator condenser mounted on the enclosure wall casing around the right side and at least 10cm.

Do not place the cabinet on the floor because the high humidity of the floor is easy to peel the rusty metal cabinets, wires as short and easy to bite off rodents wire. So put cabinets up welding metal prices, while the convection air through the condenser cabinet easier. Around the refrigerator, do not put objects obstructing air convection space of condenser heat.

Since the need to balance, not tilted. Check the tilt plate by taking a country located on the roof of the cabinet. According to the water's edge on the disk to be able to adjust the tilt of the cabinet by turning the knob at the foot of the cabinet.